Accessory Hardware

Sort by Name Group by Category

TA-1 Adjustable T-Strike

TA-10 Regular Arm Closer Reinforcement Bracket (used with TA-8, TA-23, TA-28, TA-28M, & TA-30 Casing)

TA-10M Reinforcement Bracket – Used as a filler when preparing frame for Electric Strike

TA-11 Hinge Reinforcement Bracket (Specify Hinge Size and /Screw Pattern Emboss)

TA-12 Parallel Arm Closer Reinforcement Bracket

TA-14 1/2″ Glass Stop (Specify Color and Length)

TA-15A Adjustable Mullion Bracket

TA-15F Floor Anchor Bracket

TA-15N Mullion Bracket

TA-17 Deadbolt Strike Filler Plate

TA-18 Casing Retainer Clip

TA-18L Casing Retainer Clip (used for Casing Joints)

TA-19F 1/2″ Glass Stop Screws #6 x 1″ Phillips Flat Head Tek – for TA-14 Glass Stop) – (Specify Finish)

TA-19F 3/4″ Glass Stop Screws #6 x 1 1/4″ Phillips Flat Head Tek – for TA-14F Glass Stop) – (Specify Finish)

TA-2 T-Strike Filler Plate

TA-20 Strike Screws #8-32 x 3/8″ Phillips Flat Head, Self Tapping (Specify Finish)

TA-24 Casing Corner Piece (used with TA-23, TA-28 and TA-28M Aluminum Casing)

TA-25 Multipurpose Hardware Reinforcement

TA-27 Header Alignment Tab

TA-3 Deadbolt Strike

TA-31 Casing Corner Piece (used with TA-30 Casing)

TA-32 4 7/8″ ASA Strike Filler Plate

TA-39 Deadbolt Strike – Adjustable Kerf Frame

TA-4 Storage Hasp (2 1/2″ Length)

TA-40

TA-42

TA-45 Deadbolt Strike Filler Plate (ANSI 2 3/4″)

TA-46 Fixed Throat Kerf Smoke Gasket/Weatherstrip Available in Browntone and White.

TA-47 Parallel Arm Closer Reinforcement Bracket – Fixed Throat Kerf Frame (was TA-12K)

TA-48 Parallel Arm Closer Reinforcement Bracket – Adjustable Kerf Frame

TA-4EX Storage Hasp – Extended Length (2 15/16″ Length)

TA-5 (Frame drilled for 1/4″ hole for rubber silencer also available)

TA-51 Silicon Smoke Gasket (Specify Color and Length)

TA-52 Residential Flushbolt Strike (for 5/16″ Diameter Bolt) (was TA-17FB)

TA-53 Commercial Flushbolt Strike (for 1/2″ Diameter Bolt) (was TA-17FA)

TA-54 Very High Bond Double Sided Tape (3/4″ x 12″)

TA-58 Continuous Hinge Reinforcement (Specify 6-8, 7-0 or 8-0 Length)

TA-6 Casing Corner Piece (used with TA-8 Casing)

TA-60 Mullion Assembly Screw (#8 x 1/2″ Phillips, Pan Head, Tek Screw, Zinc)

TA-69 Onity Strike Screw (#8-32 x 1/2” Phillips, #6 Pan Head, Stainless Steel)

TA-70 1 3/8″ Roller Latch Strike

TA-71 1 3/4” Roller Latch Strike

TA-9 Touch-Up Paint, 12 oz. Aerosol (Specify Color)

Strikes

TA-1 Adjustable T-Strike

TA-17 Deadbolt Strike Filler Plate

TA-2 T-Strike Filler Plate

TA-3 Deadbolt Strike

TA-32 4 7/8″ ASA Strike Filler Plate

TA-39 Deadbolt Strike – Adjustable Kerf Frame

TA-4 Storage Hasp (2 1/2″ Length)

TA-40

TA-42

TA-45 Deadbolt Strike Filler Plate (ANSI 2 3/4″)

TA-4EX Storage Hasp – Extended Length (2 15/16″ Length)

TA-52 Residential Flushbolt Strike (for 5/16″ Diameter Bolt) (was TA-17FB)

TA-53 Commercial Flushbolt Strike (for 1/2″ Diameter Bolt) (was TA-17FA)

TA-70 1 3/8″ Roller Latch Strike

TA-71 1 3/4” Roller Latch Strike

Reinforcements

TA-10 Regular Arm Closer Reinforcement Bracket (used with TA-8, TA-23, TA-28, TA-28M, & TA-30 Casing)

TA-10M Reinforcement Bracket – Used as a filler when preparing frame for Electric Strike

TA-11 Hinge Reinforcement Bracket (Specify Hinge Size and /Screw Pattern Emboss)

TA-12 Parallel Arm Closer Reinforcement Bracket

TA-25 Multipurpose Hardware Reinforcement

TA-47 Parallel Arm Closer Reinforcement Bracket – Fixed Throat Kerf Frame (was TA-12K)

TA-48 Parallel Arm Closer Reinforcement Bracket – Adjustable Kerf Frame

TA-58 Continuous Hinge Reinforcement (Specify 6-8, 7-0 or 8-0 Length)

Glass Stop

TA-14 1/2″ Glass Stop (Specify Color and Length)

Brackets

TA-15A Adjustable Mullion Bracket

TA-15F Floor Anchor Bracket

TA-15N Mullion Bracket

Casing Components

TA-18 Casing Retainer Clip

TA-18L Casing Retainer Clip (used for Casing Joints)

TA-24 Casing Corner Piece (used with TA-23, TA-28 and TA-28M Aluminum Casing)

TA-31 Casing Corner Piece (used with TA-30 Casing)

TA-6 Casing Corner Piece (used with TA-8 Casing)

Screws

TA-19F 1/2″ Glass Stop Screws #6 x 1″ Phillips Flat Head Tek – for TA-14 Glass Stop) – (Specify Finish)

TA-19F 3/4″ Glass Stop Screws #6 x 1 1/4″ Phillips Flat Head Tek – for TA-14F Glass Stop) – (Specify Finish)

TA-20 Strike Screws #8-32 x 3/8″ Phillips Flat Head, Self Tapping (Specify Finish)

TA-60 Mullion Assembly Screw (#8 x 1/2″ Phillips, Pan Head, Tek Screw, Zinc)

TA-69 Onity Strike Screw (#8-32 x 1/2” Phillips, #6 Pan Head, Stainless Steel)

Alignment Tab

TA-27 Header Alignment Tab

Gaskets

TA-46 Fixed Throat Kerf Smoke Gasket/Weatherstrip Available in Browntone and White.

TA-51 Silicon Smoke Gasket (Specify Color and Length)

Silencers

TA-5 (Frame drilled for 1/4″ hole for rubber silencer also available)

Double-Sided Adhesive Tape

TA-54 Very High Bond Double Sided Tape (3/4″ x 12″)

Paint

TA-9 Touch-Up Paint, 12 oz. Aerosol (Specify Color)