STANDARD JAMB DEPTHS
S-Series: 3 3/4″, 4 5/8″, 4 7/8″, 5″ and 5 3/8″
C-Series (18 gauge): 3 1/2″, 3 3/4″, 4″, 4 5/8″, 4 7/8″, 5″, 5 3/8″, 6 5/8″, 6 7/8″ and 7 1/4″
CUSTOM JAMB DEPTHS
C-Series (18 gauge): 2 5/8″ to 13″ in 1/8″ increments.
Note: The available jamb depths and door weights listed here apply to the Classic Frame in general. Some limitations may apply when looking at specific information. For example, a communicating frame must have a larger minimum jamb depth than listed here.
Wood casing: can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame. Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
STANDARD FINISHES
PRE-MATCHED CUSTOM FINISHES
ELITE SERIES
430 BRIGHT STAINLESS STEEL (ES204)
304 #4 BRUSHED STAINLESS STEEL (ES206)
Custom color matching is also available. Submit color chip for matching. Consult factory for pricing and lead times.
Notes: Color chips available upon request, all finishes are semi-gloss unless otherwise specified. Touch-up paint available upon request, colors may vary slightly. For complete technical information, contact your Timely distributor or our Marketing Service Department. Colors & price subject to change.
*Click to enlarge drawings
1 3/8″ Door
GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.
Available in both door sizes
3 ¾” FACE NO STOP HEADER — Use with standard frame for Concealed Overhead Closer
GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.
1 3/4″ Door
3 ¾” FACE INSERT — Use for sub frame at head with standard frame in CMU
GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.
Notes: 1. C-Series Sidelights are only avaliable in Profiles C, E, or F.
2. 4″ Sidelights are only avaliable in Profiles E or G.
3. Profiles are shown with TA-8 Casing for example only.
S-Series 20 GAUGE
Available in both door sizes
Notes: 1. S-Series Sidelights will be supplied with C-Series Mullions. 2. Profiles are shown with TA-8 Casing for example only.
